CASTROL AIRCOL PD 32

Castrol Aircol ™ PD series is designed for the lubrication of both reciprocating and rotary compressors.

It is a compressor oil series produced using high quality refined base oils and superior additive technology.

Application

Castrol Aircol ™ PD series are ashless oils recommended for rotors, bearings and gears of rotary compressors. Especially

For screw type compressors operating in an oil bath under normal conditions with an oil change interval of up to 2000 hours

suitable. Normal use conditions for screw type compressors, according to ISO 6743-3: 2003, maximum discharge temperature = / <

It is stated as 100 ° C.

Castrol Aircol ™ PD series complies with ISO 6743 classification, both normal and heavy duty, reciprocating and

It can be used in rotary lubricated compressors.

Normal terms of service are as follows:

discharge temperature = / <165 ° C

pressure difference = / <2.5 MPa (25 bar)

discharge pressure = / <7.0 MPa (70 bar).

Heavy duty conditions are as follows:

discharge temperature> 165 ° C

pressure difference> 2.5 MPa (25 bar)

discharge pressure> 7.0 MPa (70 bar)

Castrol Aircol ™ PD compressor oils tend to form low carbon. Air discharge temperatures up to 220 ° C

Meets the requirements of DIN 51506 VDL class for reciprocating compressors.

Selection of the appropriate viscosity grade should be taken into consideration by the compressor manufacturer's recommendation. However, making a generalization

Aircol PD 32 and 46 are suitable for rotary type compressors operating in oil bath, while Aircol PD 68 and 100

It would be appropriate to choose reciprocating compressors for the crankcase and cylinders. Aircol PD 150 vane compressors or

Recommended for reciprocating compressors operating at high ambient temperatures.

Castrol Aircol ™ PD series is fully compatible with nitrile, silicone and fluoropolymer sealants.

Aircol PD series:

It is in DIN 51506 VD-L class.

ISO 6743-3 compressor oils: DAA and DAB reciprocating air compressors, DAG rotary air compressors specifications

meets.

Castrol Aircol ™ PD series, such as Atlas Copco, Champion, Sullair, Compair / Broomwade, Ingersoll-Rand, Kaeser and Bauer

Meets the requirements of many major compressor manufacturers (when using the appropriate viscosity grade).