Mobilube 1 SHC 75W-90
Fully synthetic, super performance commercial gear oil formulated with advanced technology base oils and state-of-the-art additive system. This product is designed for manual heavy duty transmissions and rear axles used in applications requiring gear oils with relatively higher viscosity and excellent load-carrying capacity, in wide temperature ranges and in applications where extreme pressure and shock loads are expected. Mobilube 1 SHC 75W-90 has higher thermal and oxidation stability, higher Viscosity Index (VI), extremely low pour point and better fluidity at low temperature.
The state-of-the-art technology behind the Mobilube1 SHC 75W-90 oil provides optimum protection against temperature-related deterioration and oxidation, wear and corrosion, as well as cutting stability, long service life and fuel savings . This product is formulated to provide a higher viscosity index by structure using synthetic base oils to provide stronger film strength at higher temperatures than mineral oils without the addition of VI improvers. Since the product maintains its fluidity without channeling at temperatures below zero, said technology also ensures effective lubrication. Mobilube 1 SHC
75W-90 meets or exceeds API MT-1 / GL-4 / GL-5 gear oil service ratings.
Features and Benefits
Today's technology has greatly improved the load, torque and speed performance and control capabilities of heavy-duty equipment operating on highways and terrain, thanks to innovative drive train designs. These designs have changed and increased expectations from lubricants in order to meet superior performance requirements, increase efficiency and reduce operating costs. Friction control for longer gear and seal life, smoother operation, better fuel economy and higher load / high torque capacity in the wide range of applications where heavy duty final drive units operate
optimum protection against wear, thermal stability, shear stability, protection against rust and corrosion, and protection of sealing elements is essential. Mobilube 1 SHC 75W-90 was developed to deliver exceptional performance and the lowest total operating cost associated with lubrication in heavy-duty powertrains. The main benefits are:
Features Advantages and Benefits
Longer gear and bearing life due to minimization of deposits
Exceptional thermal stability and resistance to oxidation due to high temperatures
Longer seal life
Exceptional protection against low speed / high torque wear, scaling and increased load bearing capacity high speed engine wear
Lower maintenance costs and longer equipment life
Prevents wear by maintaining viscosity and film strength under hard working conditions
Excellent cutting stability
Features Advantages and Benefits
Increased synchromesh performance and longer component life
Excellent protection against corrosion, discoloration and corrosion of copper and its alloys
Increased fuel economy and easier gear shifting
Improved friction properties
Reduced wear and ease of start-up even in pole conditions
Exceptional fluency at low temperature compared to mineral oils
Possibility of using single oil in heavy duty manual transmissions and rear axles
Wide range of versatility
Good resistance to foaming Maintaining film strength for effective lubrication
Compatible with typical automotive seals and gaskets Minimum leakage and less contamination
Usage places
• Heavy duty manual transmissions and axles requiring performance at API GL-4, GL-5 and MT-1 level
• Light and heavy duty trucks, buses, minibuses and cars used on the road
• Industry such as construction, quarrying and agriculture working in land conditions
• As an initial filling, leveling and refilling oil in transmissions, axles and other applications where lubricants conforming to API GL-4, GL-5 and MT-1 are used or where medium overpressure gear oils are recommended
• Not designed for automatic, manual or semi-automatic transmissions where engine oil or automatic transmission oils are recommended
• Recommended for applications where long maintenance intervals and long warranty are required
Specification and Approvals
Mobilube 1 SHC 75W-90 meets or exceeds the following industry and manufacturer specifications
passes:
API GL-4 / GL-5 / MT-1 X
ZF-TE-ML 02B / 05B / 07A / 12B / 16F / 17B X
MAN 3343 Type SL X
Scania STO 1.0 X
Typical Features
Mobilube 1 SHC 75W-90
SAE Class 75W-90
Viscosity, ASTM D 445
cSt @ 40ºC 102
cSt @ 100ºC 15.1
Viscosity Index, ASTM D 2270 156
Pour Point, ºC, ASTM D 97 -54
Flash Point