CASTROL Ilocut HSW 3

Description

Castrol Ilocut HSW 3 in an extreme-pressure neat cutting oil based on solvent-refined mineral oil with active

sulfur, chlorine and fat. Appearance is clear and dark brown.

Applications

• Castrol Ilocut HSW 3 is specially formulated for use in thread-cutting machines including pipe threading and tapping.

• Castrol Ilocut HSW 3 may be recommended as a cutting oil for Rigid and other types of screwing machines used

by plumbers in the building industry.

• Temperature application range: up to +200 ° C / +392 ° F

Advantages / Features

• Excellent die life.

Heavily loaded with extreme-pressure additives, which is especially important when handling arduous

operations such as thread cutting, tapping and drilling.

Castrol Ilocut HSW 3 in extreme pressure neat cutting oil based on solvent-refined active mineral oil

sulfur, chlorine and oil. Its appearance is clear and dark brown.

Apps

• Castrol Ilocut HSW 3 has been specially formulated for use in threading machines, including pipe threading and tapping.

Castrol Ilocut HSW 3 can be recommended as a cutting oil for Rigid and other types of screwdrivers.

by plumbers in the construction industry.

Temperature application range: up to +200 ° C / +392 ° F

Advantages / Features

• Excellent mold life.

Heavy loaded with extreme pressure additives, especially important in tough use

operations such as threading, tapping and drilling.

• Provides excellent surface quality.

• Provide clean threads.

• It is blended to a relatively low viscosity.

• Extra wash cycles to remove chips from the cutting area.

• The lubricant penetrates the cutting area well.

• Excellent cooling effect.

• Excellent extreme pressure additives.

MEASURES:

• Not suitable for non-ferrous metals.

• Avoid water ingress.

• Ensures excellent surface finish.

• Ensure clean threads.

• Blended to a relatively low viscosity.

• Extra flushing actions to clear swarf out of cutting area.

• Good penetration of lubricant cutting area.

Excellent cooling action.

• Excellent extreme-pressure additives.

PRECAUTIONS:

• Not suitable for non-ferrous metals.

• Avoid water entry.