CASTROL Rustilo DW 4130

Descripción

Cppp

Aplicación

Rustilo DW 4130 is used for protecting components previously exposed to water-containing machines and

grinding coolants, cleaners, or water rinses and also long term indoor protection of parts and components, which

are stored under humid conditions.

Rustilo DW 4130 can be applied preferably by immersion, but if impractical, the fluid may be applied by brushing

or spraying.Información adicional

The claims on film thickness and consumption are average values. These are valid for smooth surfaces

with good drain-off characteristics and simple geometries without holes or recesses.

 •

Average drying time is the time until the majority of the solvent is evaporated at ambient temperature and a

relative humidity of 60 – 70%. The full corrosion protection will just be provided when the solvent is

completely evaporated.

 •

"Indoor storage” describes the storage of ferrous components in closed store-rooms having a relative

humidity of 60%. Increased protection times could be achieved when treating finished surfaces or store the

parts in a sealed pack.

 •

"Outdoor storage” describes open storage, which assumes primary protection from the elements by

tarpaulin or other form of cover.

 •

Influence of temperature may cause some cloudiness, which is reversible and doesn’t have an impact on

product quality.

 •

If required protective films of Rustilo DW 4130 can be removed by using a petroleum solvent or alkaline

process cleaner, all available from Castrol.