CASTROL Magna CL 680

Description

The Castrol Magna™ CL Range 150 - 460 viscosity grades (previously called Castrol Cresta™ VA range) are formulated

with high quality mineral base oils, with the addition of friction and lubricity modifiers to increase the film strength and

reduce friction. Magna CL 150 - 460 grades are compounded oils suitable for cylinder lubrication in reciprocating type

has compressors dealing with “wet” petroleum gases.

Magna CL 1000 (previously called Cresta™ SHS) is formulated from selected base cylinder stocks to achieve the

desirable characteristics of high flash point and oxidation stability. It possess good demulsibility, which means for the

lubrication of the cylinders of high speed, totally enclosed steam engines, it does not materially reduce the demulsibility

of the crankcase oil.

Application

Magna CL 150- 460 grades are formulated for the cylinders and bearings of older type gas engines. It is blended with

fatty agents (also termed “compounded”). The compounding agent provides improved load carrying properties and thus

enables the oil to be used for other duties, particularly where higher loads occur or where moisture is present.

Magna CL 1000 is designed for lubrication of steam engine cylinders and valves. It is also suitable for other purposes,

such as the lubrication of heavily loaded slow-moving bearings and gears. It is also suitable for condensing engines

using high pressure steam up to 200psi and superheat up to 345°C/653°F.

Higher viscosity products from Magna CL range can also be used in worm gearboxes.