CASTROL Molub-Alloy 860/150-0 ES

Description Castrol Molub-Alloy ™ 860 ES greases are high performance, multi-service lithium complex greases formulated for protection against corrosive process waters from a combination of premium petroleum base oils, lubricating solids and specially selected corrosion inhibitors. These are designed to extend the service life of bearings in severe conditions. On-duty applications and high temperatures. Molub-Alloy 860 ES greases provide a suitable oil film for: applications sustained longer at slower to medium speeds, higher loads and / or higher temperatures. The load carrying and anti-wear capabilities of Molub-Alloy 860 ES greases surpass traditional complex greases. High performance is the result of chemical additives that work synergistically with the exclusive Molub-Alloy. lubricating solids evenly distributed throughout the grease. These lubricating solids are beneficial at greatest low speeds or when bearings withstand heavy loads and impacts. Solids also protect newly machined transport surfaces during the critical "run-in" period. Good bearing surfaces are essential for a long service life. Application Primary metals including steel - use Molub-Alloy 860 ES greases near hot ingots, soak pits, and reheat furnaces to lubricate pit cover cars, mill table screws, slipper couplings, roller bearings, manipulators and guide rolls for continuous wheels. Paper and forestry products - on paper machines, use Molub-Alloy 860 ES greases in the "wet side" bearing, suction, and press roller bearings where water wash, abrasive process waters and high temperatures are present. Molub-Alloy 860 ES greases have been used successfully in all heavy-duty industry applications including anti-friction bearings, bushings, mill rolls and couplings.

• Molub-Alloy 860/150 ES greases should be used when temperatures are high, with medium to heavy loads. (Up to 232 C / 450 F) and medium to high speeds

• Molub-Alloy 860/220 ES greases should be used when temperatures are elevated, with medium to heavy loads. (Up to 232 ° C / 450 ° F) and speeds are slow to medium

Molub-Alloy 860/460 ES greases can be used when loads are heavy, temperatures are high (up to 232 ° C / 450 ° F) and speeds are slow.

Advantages

• Excellent friction reduction properties thanks to Molub-Alloy solid lubricants - reduced energy providing easier starting, reduced heat and longer bearing life.

• Exceptional water resistance - the coating film stays on the surface even in the presence of water when exposed to the influence of hot and chemically active process water.

• Excellent EP and anti-wear properties - protects equipment from overload / shock loading and helps to minimize bearing component wear and thus extends equipment life.

 • Excellent mechanical stability and adhesion - the grease maintains its consistency in service and protection and reduced consumption as film remains between oiled surfaces over the long term.

• Exceptional oxidation / thermal stability and high dropping point - reliable performance and oil life in long-term high temperature applications.

• Formulated to address environmental concerns ¬– free of antimony, barium, lead and zinc.