CASTROL Molub-Alloy 9030-1

Description High performance Molub-Alloy ™ 9030-1 Grease is a multi-service lubricant designed to extend the service life of bearings in heavy-duty applications and high temperatures. Molub-Alloy 9030-1 Grease is intended to provide a heavier oil Film timeframes for applications that overload at low speeds and where higher temperatures are maintained for longer. This grease is suited to the tough service requirements associated with facilities producing primary metals, chemicals, cement, glass and paper. The following performance characteristics were highlighted in the development of Molub-Alloy 9030-1 Grease: Higher viscosity base oil, ISO VG 460, to increase load carrying capacity; Temperature stability to withstand high and intermittent high temperatures (drop point above 500 ° F / 260 ° C); Slip stability to extend the service life of precision frictionless bearings; It resists the washing effect of water and contains a combination of corrosion inhibitors; Eco-Solutions product offer from Castrol Performance Lubricants. Formulated to address environmental concerns, Molub-Alloy 9030 is lead, solvent, antimony and barium free. Supported by a unique, new polyurea thickening system, the heavy, temperature-resistant base oil ISO Viscosity Class 460 maintains a stable lubricating film that is resistant to the effects of heat, heavy and shock loads and attack. pollutants in the air and impact of process water. Molub-Alloy 9030-1 Grease is combined with oxidation and corrosion inhibitors to protect against rust. Allows extended relubrication cycles and some well sealed applications for non-regreasing service. A high performance chemical additive system works synergistically with dispersed selected lubricating solids. evenly throughout the grease. These lubrication solids must withstand their greatest benefits at low speeds or heavy loads and impacts of bearings.

Application Molub-Alloy 9030-1 Grease should be used when loads are heavy, temperatures are high and speeds are slow. Inherently multipurpose Molub-Alloy 9030-1 Grease can be used for general plant lubrication in most applications, including anti-friction and plain bearings, slides, screws and other applications where superior adhesion is required.

Advantages Lubricating solids allow the lubrication interval to be extended while providing extra anti-wear protection. Molub-Alloy 9030-1 Grease is formulated to withstand extreme pressures and heavy shock loads. Molub-Alloy 9030-1 Grease passes rigorous rust tests and provides protection from abrasive moisture.