CASTROL Molub-Alloy 2115-2

Description

Castrol Molub-Alloy 2115 grease is a thermally stable high temperature synthetic bearing lubricant. It is formulated from

an advanced synthetic fluid and thickened with a temperature stable non-soap base. Molub-Alloy 2115 includes a blend

of performance additives and Molub-Alloy lubricating solids for exceptional wear protection and is designed to greatly

extend service life and relubrication intervals in high temperature bearings, compared to conventional greases.

Application

Primarily developed for extended service in oven conveyor bearings, Molub-Alloy 2115 is recommended for bearings

operating in paint drying ovens, textile tentering frames, and similar applications where minimum reapplication and dripfree performance is required. Molub-Alloy 2115 can be used in continuous service at 250°C/482°F and may be exposed

to intermittent temperatures up to 280ºC/536ºF. Forced draft ventilation should be used at temperatures exceeding

200ºC. Molub-Alloy 2115 can be applied manually or with automatic dispensing equipment.

Advantages

 • Thermally and chemically stable – high resistance to oxidation at high temperatures therefore extending relubrication

intervals without undue risk of under lubrication,lubrication starvation,or an increase in power draw.

• Virtually inert below 300ºC/572ºF- resists the thickening and hardening that is typical of petroleum greases in high

temperature service.

• Even at high temperatures (refer application section), Molub-AIIoy 2115 is resistant to most non-fluorinated solvents

and most chemicals, including strong acids, alkalis and oxidising agents.

• Low volatility - does not volatilise readily at high temperatures and/or when exposed to high vacuum.