CASTROL Molub-Alloy 958 SF

Description

Castrol Molub-Alloy 958 SF is a multi-purpose grease for high loads, which is specially designed for

Year-round use in large shovels , excavators, drills and Mills was developed. Another

Attention has been paid to the suitability for large rolling bearings, which are protected from extreme pressure and shock loads by

a sufficiently thick lubricating film can be protected and thus achieve a longer service life.

Due to the wide range of applications Castrol Molub-Alloy 958 SF offers the additional advantage that the

Number of lubricants can be reduced by Variety simplification and thus the risk of application of a

of the wrong lubricant. Castrol Molub Alloy was developed to take environmental considerations into account.

958 SF formulated without lead, antimony, barium or solvent.

The mineral and synthetic oils in Castrol Molub-Alloy 958 SF were tested with respect to their physical and

chemical stability as well as their good viscosity temperature behaviour. They form a smooth

Lubricating film, which, however, adheres tenaciously and does not drain from horizontally arranged gears.

A specially selected mixture of solid lubricants of suitable particle size give the lubricant

Anti-wear properties and a load-bearing capacity that cannot be achieved with conventional lubricants

have. The mixture of mineral and synthetic base oils still guarantees even at low temperatures

excellent Pumpability. The high base oil viscosity guarantees a sufficient lubricating film thickness

low sliding speeds and high loads.

Application

Castrol Molub-Alloy 958 SF is particularly suitable in dusty conditions such as open pit mining or cement mills

prevail, recommended. It was formulated in such a way that accumulation and hardening of the lubricant in the

Tooth base and in semi-closed gears is prevented.

Castrol Molub-Alloy 958 SF is used in the application areas open running gear, racks & pinion,

Spoon arms, rails & rollers, large radial bearings and large, slow-running rolling bearings used.

Castrol Molub-Alloy 958 SF can be used in mills that are used both for rough processing and for fine machining of

Raw materials are used, e.g. in coal, cement or phosphate Mills. Castrol Molub-Alloy 958 SF is

equally suitable for ball mills and Rod Tube Mills.

Instructions for use

Castrol Molub-Alloy 958 SF meets the following manufacturer specifications: p & h, spec. 464; P & H, Spec. 472 B; Demag

Komatsu, 01159799; Bucyrus Erie, MPG X 2618; Bucyrus Erie, OG X 2642

Since the climatic conditions are important for product selection, for some applications and

Conditions other product recommendations may be necessary. Please contact our application technology.

Temperature range: -20 °C to + 90 ° C. different temperature ranges may apply depending on the application.

Benefits

Resistant lubricating film to weather conditions

Very good adhesion

No accumulation and hardening in the tooth base

Variety consolidation possible due to wide range of applications

Wide temperature range, therefore year-round use possible