CASTROL Molub-Alloy OG 9790/2500-0

Description

Castrol Molub-Alloy ™ OG 9790/2500-0 (Previously called Molub-Alloy ™ 9790/2500-0) grease is a heavy-duty lubricant

formulated for multi-service, all-season applications and may be used an large draglines, shovels, drills and mill

references They may be used in the following applications under the most severe environments

Mill & kiln open gears

Open gears-racks & pinions-Dipper sticks - Rails & rollers

Large journal bearings-Large slow-speed rolling bearings

Molub-Alloy OG 9790/2500-0 may be used in both, raw and finish mill operations, such as those found in coal,cement,

copper and phosphate mills, and in either ball or rod mills. The greases are also specifically suited for open gears in

cement kilns. It offers an additional benefit to operators, by reducing the number of lubricants required for each machine

and minimizing the potential for misapplication. Formulated to address environmental concerns, the lubricants are free

of lead, antimony, barium and chlorinated solvents. No solvents of any kind are used. The blend of synthetic and

petroleum oils are selected for their physical and chemical stability, and for their exceptional serviceability over a wide range

temperature range. These fluids are compounded to flow readily in the filmforming process, yet resist "squeeze out" and

cling tenaciously even to gear teeth that mesh vertically.

Molub-Alloy OG 9790/2500-0 lubricant contain solids of selected grade and size distribution which promote

antiwear and load carrying properties beyond the capacity of conventional lubricants.

The blend of synthetic and petroleum base fluids ensures excellent pumpability, even at low temperatures.

The high base oil viscosity assures sufficient film thickness at low speeds, high loads and/or elevated

temperatures

References

Molub-Alloy OG 9790/2500-0 may be used from-20 °C to + 90 °C. This is a general guide and may bec

suspended, depending on applications and conditions.

Specifically suitable for service in several conditions of dust, as found in open pit mining and in the cement

industry.

May be applied either manually or with heavy duty automatic systems suitable for the NLGI grade used.

Advantages

Superior film endurance resistes erosion from rain and sleet.

Does not harden in gear tooth roots and facilities easy removal from semi-enclosed gear cases.

Multi-service, may be used for open gear and bearing applications on draglines, shovels, drills, mills and kilns.

Careful attention has been given to the needs of large roller bearings to protect against extreme pressures and

shock loads, and to provide sufficient film thickness to extend bearing life.

Reduce product inventory and minimises the risk of contamination or misapplication.

All-season, may be used all year-round.