CASTROL Molub-Alloy TopFit 3844

Description

• Castrol Molub-Alloy

® TopFit 3844 is an anti-seize paste formulated for installation with

threaded connections at high temperatures.

• Castrol Molub-Alloy

® TopFit 3844 prevents scuffing, galling, cold welding and wear up to

temperature + 1100 ° C.

• Castrol Molub-Alloy

® TopFit 3844 is formulated with a synthetic base oil and lithium

thickener. Through the use of specially selected additives and solid lubricants

provides good release and sealing properties at high temperatures and high

humidity (even in aggressive environments). Surfaces exposed to high loads are protected from

scoring, corrosion and other damage.

• Castrol Molub-Alloy

® TopFit 3844 is a silvery-gray paste used for both high

tem peratures for screw connections, slideways, sliding surfaces and

pouring ladles.

• Castrol Molub-Alloy

® TopFit 3844 contains a blend of white solid lubricants, copper, aluminum and

graphite in synthetic base oil.

• Castrol Molub-Alloy

® TopFit 3844 can be used at temperatures from -10 ° C to + 1100 ° C.

Application

• Castrol Molub-Alloy® TopFit 3844 is specially designed for use in high temperatures and

pressures.

• Suitable for threaded connections at high temperatures at thermal power plants, oil refining

industry as well as in engine exhaust systems.

• Castrol Molub-Alloy® TopFit 3844 is intended for applications where a paste is required and not

replaces lubrication with oil or grease.

Benefits

• Castrol Molub-Alloy® TopFit 3844 provides high pressure performance, good load bearing

ability, resistance to cold and hot water, and provides excellent protection against corrosion.

• Castrol Molub-Alloy® TopFit 3844 - effective immediately after application and prevents scuffing and

seized connections.

• Castrol Molub-Alloy® TopFit 3844 facilitates removal / loosening of hot threaded connections and

allows reuse of bolts.

• Good release and lubrication properties, even at high temperatures and variable

loads, caused by the use of solid lubricants

• Castrol Molub-Alloy® TopFit 3844 helps increase part and equipment life, safety

production and reduces costs, because very economical to use.

• Castrol Molub-Alloy

® TopFit 3844 must not be mixed with other oils, greases or

pastes

• Clean the surface before applying the paste

• Thin film is produced by brush, lint-free cloth or leather.