CASTROL Optimol Paste TA

Description

OPTIMOL™ PASTE TA for screw connections up to + 1100°C/+ 2012°F. It is used as assembly paste and

prevents seizing, welding or scaling. OPTIMOL PASTE TA ensures a good separating and sealing effect in high

temperature and wet environments as well as under the influence of aggressive media.

Application

• For assembly of components subjected to corrosion, extreme temperatures and unfavorable environments such

as

- screws, bushes and valves

- flanged joints and threaded tube connections

- positive-locking components

- seals, stuffing boxes and packaging

- light metal/steel friction surfaces

• As basic or thin film lubrication for sliding surfaces under high thermal loads

• Temperature application range - 40°C/-40°F to + 1100°C/+ 2012°F

Advantages

• OPTITEC® - CASTROL OPTIMOL technology

• high load carrying capacity

• resistant to hot and cold water

• immediate lubricating effect

• economical in use

• limited resistance to alkalis and acids

• good corrosion protection

• good separation ability

• easy application (spray)

Additional Information

• Clean surfaces before application.

• Apply even layer of OPTIMOL PASTE TA with a brush or a lint-free or leather cloth.

• Shake spray well before use. Hold spray can about 20 cm (6 - 8 inches) from lubrication point to apply thin and

even layer. Lubricate screws down to the root of the thread.

• For paste-specific applications - cannot replace oil or grease lubrication.

• In spray cans: OPTIMOL PASTE TA SPRAY