CASTROL Optitemp LG 2 Spray

Description

OPTITEMP™ LG 2 Spray is a fully synthetic lithium grease on a polyalphaolefin base. It is especially designed for the

application at low temperatures and for bearings running at high speeds in the normal temperature range. Good

compatibility with plastics and elastomers.

OPTITEMP LG 2 is approved according to: VW/AUDI - TL-VW 778 A; BMW - GKM No.0127 403, 0127 473; DBL - 6827.40;

Brose - 002-563501-104 group 3;

Application

Door lock cylinders and door locks in vehicle construction.

Rolling and sliding bearings, clutch bearings and wheel hubs for long-term and lifetime lubrication at low

temperatures.

Bearings running at high speeds (n x dm - factor up to 1 mio.).

Grease-lubricated sliding surfaces at temperatures from - 50°C/- 58°F to + 100°C/+ 212°F or + 120°C/+ 248°F

Wide temperature application range:

OPTITEMP LG 2: - 50°C/- 58°F to +120°C/+ 248°F

Conditions of Use

Fill bearing housing only about half-full with OPTITEMP LG 2.

Follow the specifications of the bearing manufacturers.

Thoroughly clean bearing before introducing the initial fill.

Do not mix with other greases. In case of doubt please consult the Technical Service of Castrol Industrie GmbH as

to the compatibility with competitive products.

Advantages

Easy start-up at low temperatures.

Compatible with plastics such as polyacetal (e.g. "Delrin") and polyamide (e.g. "Ultramid")

Compatible with elastomers based on synthetic materials (e.g. NBR, CR) and NR-base as well as with rubber.

Do not affect top coat paints e.g. in vehicle construction.

Optimum wear protection.

Good corrosion protection.

Extraordinary water resistance.