CASTROL Molub-Alloy 9030-0

Description

High performance Molub-Alloy 9030 Grease is a multi-service lubricant designed to extend the service life of

bearings in heavy duty applications and at elevated temperatures. Molub-Alloy 9030 Grease is intended to provide

a heavier oil film for applications with excessive loading at slow speeds and when higher temperatures are

sustained for longer periods of time. This grease matches the rugged service requirements associated with plants

producing primary metals, chemicals, cement, glass and paper.

The following performance characteristics were emphasized in the development of the Molub-Alloy 9030 Grease:

• Higher viscosity base oil, ISO VG 460, to increase the load carrying capacity;

• Temperature stability to withstand elevated and intermittently high temperatures (dropping point over

500°F/260°C);

• Shear stability to increase the service life of precision antifriction bearings;

• Resists washing action of water and contains a combination of corrosion inhibitors;

• Castrol Performance Lubricants’ Eco-Solutions product offering. Formulated to address environmental concerns,

Molub-Alloy 9030 is free of lead, solvents, antimony and barium.

A heavy, temperature stable base oil, ISO Viscosity Grade 460, supported by a unique, new polyurea thickening

system maintains a constant lubricating film resistant to the effects of heat, heavy and shock loadings, and the

incursion of airborne contaminants and the impingement of process water.

Molub-Alloy 9030 Grease is compounded with oxidation and corrosion inhibitors to assure protection against rust

and allow for extended relubrication cycles, and in some well sealed applications for non-relubricated service.

A high performance chemical additives system works synergistically with select lubricating solids which are

dispersed uniformly throughout the grease. These lubricating solids offer their greatest benefit at slow speeds or

where bearings must endure heavy loads and shocks.

Application

Molub-Alloy 9030 Grease should be used when loads are heavy, temperatures are elevated and speeds are slow.

Multi-purpose in nature, Molub-Alloy 9030 Grease can be used for general plant lubrication in most applications

including antifriction and journal bearings, slides, screws and other applications where superior adhesion is

required.

Advantages

• Lubricating solids permit extending the lubrication interval while providing an extra measure of antiwear

protection.

• Molub-Alloy 9030 Grease is formulated to withstand extreme pressures and heavy shock loads.

• Molub-Alloy 9030 Grease passes severe rust tests and provides protection from corrosive moisture action.

Additional Information

Molub-Alloy 9030 Grease is generally compatible with other grease types. However, when replacing other grease

without complete removal of the grease in use, it is important to observe the application until stability is assured

during the changeover period.