CASTROL Optileb GR 9830

Description

Castrol Optileb ™ GR 9830 is a high temperature grease, composed of an oil and a thickener

synthetic and solid particles. This product was developed for the lubrication of rolling bearings and

plain bearings. Grease provides excellent anti-wear protection combined with relubrication intervals

extended.

This grease is perfectly suited for many applications in the food industry and

drinks, where minimum consumption, no dripping and

physiological safety.

Applications

Especially suitable for ovens and steamers in the food and bottling industry.

Grease can also be used in vacuum applications, due to its low volatility.

Continuous service is possible at temperatures of 250 ° C, for short periods up to 280 ° C.

Benefits

Very resistant to high temperature aging

Thermal and chemical stability

Resistant to most solvents such as: chlorinated hydrocarbons (1.1.1-trichloroethane, trichlorethylene,

tetrachlorethylene, chlorobenzene), to strong acids (hydrochloric acid, sulfuric acid), to bases (for

example hydroxides) and oxidizing components (for example: acetone, benzene, BF3, fluorine, chlorine and

bromine, cyclohexane, LNG, ethylene acetate, THF, toluol, xylenes, methylformate and petroleum ether).

Exceptional lubricating properties.

Below 280 ° C, this lubricant is very resistant to the thickening and hardening process

intervenes for conventional greases based on mineral oils.

Extended relubrication intervals create economic benefits: reduced fuel consumption

even product and low maintenance costs.

Compatible with the following seals: NBR, EPDM, NR, MWQ, PVMQ, PA, PE, PUR, PTFE

Employment advice

As this grease is resistant to solvents, special solvents must be used for cleaning.

Continuous use above 250 ° C may develop very small amounts of toxic fumes, due to

chemical reactions. Efficient exhaustion or ventilation is required.

Additional information

Health Safety and Environment

The safety, hygiene and environmental instructions are mentioned on the data sheets of

security made available to users. They provide essential information on risks,

precautions and the first emergency measures to be taken, as well as on the disposal of the product and its effects on

the environment.

Storage

It is recommended to store the packaging under cover. If storage is outside, the drums must be

lying down and stored horizontally to avoid possible water ingress and erasure of the identification

of the product. The products must not be stored at a temperature above 60 ° C and must not be

exposed to strong sunlight, intense cold or large variations in temperature.