CASTROL EDGE PROFESSIONAL A3 0W-40

Description

Today’s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient,

without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense

pressures cause friction, which can waste up to 10% of an engine’s performance.

Castrol EDGE Professional is micro-filtered and certified CO2 Neutral according to the highest global standard*. Its

patented Fluid TITANIUM transforms to be stronger under pressure and reduces friction for maximum engine

performance when you need it most.

Castrol EDGE Professional with Fluid TITANIUM: unlock the true performance of your engine.

* in accordance with the BSI PAS 2060 specification

Application

Castrol EDGE Professional A3 0W-40 is suitable for use in automotive gasoline and vehicles where the manufacturer

recommends: ACEA A3/B4, A3/B3, API SN/CF or earlier specification 0W-40 lubricant.

Castrol EDGE Professional A3 0W-40 is approved for use in vehicles from leading manufacturers, please refer to your

owners handbook and the specifications section.

Advantages

Castrol EDGE Professional A3 0W-40 with Fluid TITANIUM is the natural choice for drivers who demand maximum

engine performance from today’s sophisticated vehicles requiring a high level of protection and higher performance oils.

Castrol EDGE Professional A3 0W-40:

Transforms to be strongest when the pressure is highest, protecting your engine

Reduces power-robbing friction across engine speeds and conditions

Independently tested at the highest standards for proven performance

Recommended by world-leading car manufacturers

Protects the engine for the entire drain interval even under extreme pressure

Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

ACEA A3/B3, A3/B4

API SN/CF

Meets - Ford WSS-M2C937-A

MB-Approval 229.3/ 229.5

Porsche A40

VW 502 00 / 505 00

Storage

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to

avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed

to hot sun or freezing conditions.