CASTROL TRIBOL GR HT 2

Description

Castrol Tribol™ GR HT 2 (previously called Optitemp™ HT 2) is high performance grease for long-term lubrication of

rolling and sliding bearings at high operating temperatures as well as at normal or medium bearing pressures.

Tribol GR HT 2 is light-colored.

Application

-For thermally loaded rolling and sliding bearings such as fan bearings in the textile, wood, plastics and food

industries, also in stove furnaces found in the automotive industry

-For steam-heated calender or drying cylinder bearings

As sealing grease for labyrinth seals at high temperatures

-For the application in slightly acidic or alkaline atmospheres

Advantages

-Optimum wear protection in the high load range

-Extremely good load bearing capacity

-Excellent aging and temperature-resistant properties

-Structurally stable

-Resistant to cold and hot water, limited resistance to alkalis and acids

-Excellent corrosion protection

-Pumpable in central lubrication systems

-Temperature application range: - 20°C/- 4°F to + 160°C/+ 320°F. In case of life-lubricated bearings the

temperature of + 150°C/+ 302°F under normal conditions should not be exceeded. Short-term operation at higher

temperatures is possible - please consult our Technical Service.

Additional Information

Please follow the bearing manufacturer's specifications.

Do not mix Tribol GR HT 2 with other lubricating greases. In case of doubt please consult the Technical Service.

Thoroughly clean bearings before introducing the initial fill.

Fill bearing housing only about half-full with Tribol GR HT 2

This product was previously called Optitemp HT 2. The name was changed in 2015