CASTROL MOLUB-ALLOY PASTE PL

Description

MOLUB-ALLOY™ PASTE PL (previously named Optimol™ Paste PL) is especially suited for highly loaded sliding

surfaces as well as for base and thin-film lubrication at high pressures and temperatures.

For larger surfaces and lubricating points with difficult access such as bore holes, threads and gear rims we

recommend the use of MOLUB-ALLOY PASTE PL SPRAY.

Application

-For screw connections, press and snug fits at high temperatures up to + 600°C/+ 1112°F

-For sliding bearings, bushes and toothed wheels.

-On drive trains in the automotive industry.

-For base lubrication of slide ways, guides and joints.

-For good separation of tool and work piece during hot shaping of metals.

-Temperature application range: - 30°C/- 22°F up to about + 450°C/+ 842°F (in case of reduced air supply up to

+600°C/+ 1112°F)

Advantages

-OPTITEC™ - MOLUB-ALLOY technology. Wide range of applications.

-Immediate lubricating effect. Easy spray application.

-Economical in use. Thermally stable.

-Excellent emergency running properties due to especially selected solid lubricants. Maximum load carrying

capacity.

-Extremely low coefficient of friction. Good corrosion protection.

-Prevents fretting corrosion. Good adhesion and separation. Prevents stick-slip.

Additional Information

Clean surface. Apply thin layer of MOLUB-ALLOY PASTE PL with a brush or a lint-free cloth. Remove excess paste.

Shake MOLUB-ALLOY PASTE PL SPRAY (article no. 08436) well before use. Hold can about 15 - 20 cm (6 to 8 inches)

from lubricating point to apply thin and even layer of lubricant.

Only for paste-specific applications - cannot replace oil or grease lubrication. Please avoid mixing with other pastes,

greases or oils.

The product was previously named Optimol Paste PL. The name was changed in 2015.