CASTROL Radicool NF Premix

Description

Castrol Radicool NF Premix is ​​a ready-to-use engine cooling fluid formulated with monoethylene glycol and selected additives, without nitrates, amines and phosphate inhibitors. It uses hybrid technology for modern high-performance engines for light and heavy vehicles.

Castrol Radicool NF Premix does not require any dilution on the part of the customer, thus ensuring that the correct concentration is always

used.

Castrol Radicool NF Premix provides long-lasting protection against corrosion, and offers protection against freezing down to -37º C.

applications

Castrol Radicool NF premix was developed using hybrid additive technology to provide total protection for the cooling systems of modern engines, their heads, water pumps and heat exchangers.

In most situations, cooling fluids are not compatible and should not be mixed with other types of fluids except as indicated by the equipment manufacturer. If you are using Castrol Radicool NF Premix for the first time, make sure that the cooling system has been properly cleaned with clean water before using it.

Benefits

Castrol Radicool NF premix was developed to meet the growing demands of engine and vehicle manufacturers for a high-performance coolant that minimizes environmental impact. It provides excellent protection against corrosion, and because it does not contain phosphates, the deposit problem in some modern engines is eliminated. In addition to excellent protection against corrosion and low temperatures, the use of

adequate level of antifreeze reduces the likelihood of pitting in wet cylinder liners due to cavitation erosion. Cavitation erosion is caused by the impingement of air bubbles present in the cooling fluid that are attracted to the surface of the liner liners. These bubbles implode, resulting in

removal of small amounts of coating - this, if left unchecked, will result in increased porosity of the coating and severe engine damage.

OEM approvals

Protects up to 3 years

Excellent protection at low temperatures

Provides excellent protection against corrosion

Efficient lubrication of water pumps

Compatible with conventional material seals used in engine cooling systems

Contains acidifying agent

Specifications

ASTM D3306 (III)

ASTM D4985

JASO JIS K 2234: 2006

MAN 324 Typ NF

MTU MTL 5048

MB-Approval 326.0

Based on coolant concentrate conforming to:

BS 6580: 2010

Storage

All packages must be stored in a covered place. When the storage of drums outside is unavoidable, with the risk of rainwater accumulation, these should be placed horizontally, in order to avoid contamination with water and possible illegibility of the labels on the drums. The products must not be stored at temperatures above 60 ° C, exposed to the sun or to conditions of ice formation.