Po Gravis Mp 460
High Quality Gear Oil
Description
It is a closed system gear oil that does not contain lead, prevents scratching, micropitting and tooth breakage in extreme loads thanks to the new generation specially developed additives it contains.
Places of Use
It meets the FLENDER AG conditions and prevents friction scratches, micropitting and crack formation on the surfaces of the gears during the sliding-rolling movement. It can be used in all closed system gearboxes. It is also recommended in applications such as cement, iron and steel sectors with high and impact loads, in gear systems of rolling mills, calenders, cranes, excavators, cranes, conveyors, machine tools and elevators, as well as flexible couplings.
Features and Benefits
As approved by FLENDER, it provides resistance to oxidation for 10,000 hours or two years at 80 ° C.
Thanks to the specially developed additives it contains, it prevents scratching, micropitting and tooth breakage on the gear surfaces.
In the FZG spur gear test 12+ and min 70 lb. Timken meets the load value.
Thanks to the special additives it contains, it prevents the formation of deposits and deposits and does not foam.
It protects the gear system for a long time as it provides high oil film resistance.
Oxidation resistance is very high, it provides long service life.
It reduces maintenance costs and increases operating efficiency.
It protects the gears against rust and corrosion.
It continues to lubricate effectively even in contact with water.
They can be used in all types of gear systems thanks to their wide viscosity range. It provides wide application area and reduces oil diversity.
Rolling mill reducers, paper, etc. where water is concentrated. In industrial applications, it continues the lubrication work by preventing the negative effects of water.
Reduces initial wear.
It works in harmony with sealing elements.
Thanks to its high thermal stability, it does not form sediments and deposits at high temperatures, it maintains its chemical stability.
Specifications and Approvals that it meets
Certified by FLENDER AG and REMAS.
• DIN 51517 Part 3 CLP, DIN 51354 Part II, FVA-54 / II, David Brown S1.53.101, AGMA 9005- D94, SEB 181-226 and TH-N 256-142, Cincinnati Milacron, USS Steel 224
Typical Properties
SAE Viscosity Grade 68 100 150 220 320 460 680
Density @ 15 ° C g / ml ASTM 4052 0.88
5 0.88
9 0.89
6 0.90
1 0.90
7 0.91
1 .923
Flash Point COC, ° C ASTM D 92 234 252 266 280 304 296 300
Kinematic Viscosity
Mm2 / s at 40 ° C
Mm2 / s ASTM D 445 68,3 at 100 ° C
0
95.5 8.81
2nd
10.7
7 151.85
14.8
5 226.67
18.6
7 323.57
23.6
9 475.1
30.1
4 696.8
37.0
9
Viscosity Index ASTM D 2270 101 96 94 93 93 91 88
Pour Point, ° C ASTM D 97 -24 -24 -24 -18 -12 -9 -9
* Typical values may differ slightly from production to production.