Castrol Alphasyn T 10 synthetic lubricant is based on polyalpha-olefin (PAO) fluids and sulphur/phosphorus antiwear additive technology providing outstanding thermal stability and good load carrying capacity. Application Alphasyn T 10 has been formulated for use in spindle and central lubrication systems with high thermal loads. It has a very low pour point and excellent viscosity/temperature characteristics. The outstanding oxidation and thermal stability of Alphasyn T 10 allows oil change intervals to be extended in circumstances where extreme temperatures result would result in a short service if conventional mineral oil based lubricants were used. This allows cost savings to be made by reducing the level of maintenance required. Alphasyn T 10 is fully compatible with nitrile, silicone and fluropolymer seal materials. Advantages • Good thermal and oxidative stability provides reliable operation and extended operating life when compared to mineral oil based products. • Inherently high viscosity index makes the product suitable for operations operating over a wide temperature range. • Good water separation and demulsification characteristics means reduced down time through prolonged lubricant life and increased equipment reliability. • PAO based lubricant provides good compatibility with seals, paints and mineral oil based lubricants.