Description
Castrol Safecoat DW 30 is a premium quality low solids protective formulated with concentrated high performance
additives. Based on a narrow-cut high flash point volatile solvent, it dries fairly quickly to leave an ultra-thin greasy
film, which imparts medium term protective.
Application
General purpose and high precision work, especially where thicker films would be unsightly or interfere with
functioning.
• Sealing after phosphating treatments.
• The protection of hand tools and fasteners, particularly prior to packing.
• The treatment of engineering tools and gauges.
Method of use
• Articles to be dried are immersed in the fluid for one minute in a dewatering tank.
Under the action of selected surface-active additives in the fluid, all moisture on the components separates in
the form of droplets.
• These accumulate at the bottom of the tank as a separated water layer, which is drawn off daily via a drain cock.
• Large items may be treated by spraying.
Removal
The Ultra-thin film of Castrol Safecoat DW 30 is readily removed by most common cleaning techniques.
Ask your Castrol representative for a product recommendation to suit your process and equipment.
Composition
Castrol Safecoat DW 30 is based on a selected low-odor, low-toxicity, aromatic-free hydrocarbon solvent.
Advantages
Does not stain cardboard packing material (e.g blister packs)
• High coverage gives economy in use.
• Long bath life without additive addition.
• Pleasant to use.
• Powerful dewatering properties give speedy operation.
• Ultra-fine protective film is barely perceptible.
• Does not interfere with air-gauging equipment.
• Neutralizes fingerprint acidity.
• Rapid separation of displaced water.
• Resist emulsification, even when contaminated by carry-over of acid or alkali.
• Powerful dewatering properties.
• Narrow-cut solvent gives relatively quick drying.