CASTROL Rustilo Aqua10

Description

Castrol Rustilo ™ Aqua 10 is an oil free, water -based, resin type corrosion preventive.

Application

Rustilo Aqua 10 is designed to give a hard film and long-term protection. It is a permanent protective coating to help

prevent corrosion during storage and shipment of parts.

Rustilo Aqua 10 is recommended for metal surfaces, i.e. cast iron, steel, stainless steel, aluminum, copper, galvanized

and plated metals, where a hard coating can be employed to give long terms of exterior or interior rust protection on a

wide range of metal parts such as fin tubes.

Castrol Rustilo Aqua 10 can be applied as supplied by immersion, spray or flow coat.

Advantages

Can be used under very severe conditions

Short drying timeAdditional Information

The claims on film thickness and consumption are average values. These are valid for smooth surfaces with good

drain-off characteristics and simple geometries without holes or recesses.

Average drying time is the time until the majority of the water is evaporated at ambient temperature and a relative

humidity of 60 - 70%. The full corrosion protection will be provided when the solvent is completely evaporated.

(*) "Indoor storage" describes the storage of ferrous components in closed store-rooms having a relative humidity of

60%. Increased protection times could be achieved by treating finished surfaces or storing the parts in a sealed pack.

(**) "Outdoor storage" describes open storage, which assumes primary protection from the elements by tarpaulin or

other form of cover.

Storage

To avoid product deterioration always keep the container / drum tightly sealed. Store the product in a cool, dry place away

from direct sunlight. Prevent exposure to frost and avoid water ingress. For optimum product stability, it is preferable to

store the product indoors between 5 ° C and 45 ° C / 41 ° F and 113 ° F.

For more details, please refer the product safety data sheet.