CASTROL Optitemp LG 0

Explanation

OPTITEMP ™ LG are fully synthetic lithium oils based on polyalfaolefin. Specially designed for them

application for bearings operating at low temperatures and at high speeds in the normal temperature range. Good

compatibility with plastics and elastomers.

OPTITEMP ® is certified according to LG 2: VW/Audi-TL-VW 778 a; BMW-GKM no.0127 403, 0127 473; DBL-6827.40;

Brose-002-563501-104 Group 3; for Opel-B 040 0060 LG 0

Reference

Door lock rollers and door locks in vehicle construction.

Rolling and sliding bearings, clutch bearings and wheel hubs provide long-term and lifetime lubrication at low temperatures.

temperatures.

Bearings operating at high speeds (n x dm factor up to 1 mio.).

Lubricated sliding surfaces at temperatures from -50°C/ -58°F to + 100°C/+ 212°F or + 120 ° C/+ 248°F

OPTITEMP ® LG 0-especially suitable for sensitive friction points due to its soft, semi-liquid grease structure

mechanical.

Wide temperature application range:

OPTITEMP ® LG 0: -50 ° C/ -58 ° F to + 100 ° C/ + 212 ° F

OPTITEMP ® LG 2: -50 ° C/ -58 ° F to + 120 ° C/ + 248 ° F

Terms of use

Fill the bearing housing only half full with OPTITEMP ® LG.

Comply with the specifications of bearing manufacturers.

Thoroughly clean the bed before introducing the first filling.

Do not mix with other oils. If in any doubt, please consult the technical service of Castrol Industrie GmbH.

for compatibility with competitive products.

Also available as OPTITEMP ® LG 2 spray (Art.no, 09512)

Advantages

OPTITEC ® - OPTIMOL technology.

Easy start-up at low temperatures.

Compatible with plastics such as polyacetal (e.g. "Delrin") and polyamide (e.g. "Ultramide")")

Compatible with synthetic materials (such as NBR, CR) and elastomers based on NR base and rubber.

It does not affect top coat paints, as in vehicle construction.

Optimum wear protection.

Good corrosion protection.

Outstanding water resistance.