CASTROL Braycote 640 ACMS

Explanation

Castrol Braycote ™ 640ACMS is a NLGI Grade 3-1 / 2 lubricating grease based on perfluoroether.

it contains tetrafluoroethylene telomere and about one hundred and forty molybdenum disulfide. Castrol Fluoroclean X100

this can be used to remove the lubricant. See the Fluoroclean X100 Data Sheet for information on this product.

Application

Braycote 640 ACMs, designed to be used as heavy duty grease suitable for high high bearings and lox sliding surface

application. It can also be used as an anti-trapping and non-seepage compound for spinning applications. BRAYCOTE is 640ACMS

it is suitable for use with oxidizers such as fuels and oxygen. Perfluorinated greases, in general, exhibit excellent shelf life

because of their internal inertness.

Additional Information

Temperature Range

- 36ºC to 204ºC (- 30ºf to 400ºF) in Normal operating conditions and up to 260°C (500°F) in short periods. Low

the temperature capacity is excellent when sufficient torque is available.

Limitations

Braycote 640ACMS is compatible with all metals, plastics and elastomers used as publications. This may be adversely affected

Lewis acids such as aluminum chloride at high temperatures. Sliding faces of aluminum, magnesium or other materials.

certain runs can react with this product in gold titaniums. Such systems should be thoroughly evaluated.

Surfaces must be well cleaned from organic rust inhibitors before applying grease to ensure proper lubrication. This

the product is not recommended for use in high vacuum applications with loads exceeding 100,000 psi for long-term use.

time periods.

Packaging

Braycote is available in 640ACMS, 2-ounce (AVDP) syringes and 1-pound jars.