Description
MOLUB-ALLOY™ PASTE PU (previously named Optimol™ Paste PU) is especially suited for sliding points exposed to
high loads and temperatures. The synthetic carrier liquid evaporates at a temperature of about + 200°C/+ 392°F leaving
a dry sliding film of solid lubricants that contains MoS2. It provides a reliable lubrication of the friction partners up to
temperatures of + 600°C/+ 1112°F. MOLUB-ALLOY PASTE PU is usually also suited for components which are not
resistant to mineral oils.
Application
Multiple applications in the high-temperature range in brickworks, bakeries, iron and steel works and the
ceramics industry - in ovens, kilns and furnace carriages - at hot transport chains and rollers - in sliding bearings
and - converters.
Also for components which are not resistant to mineral oil and which tend to swell e.g. rubber and leather.
Temperature application range: - 30°C/- 22°F to + 400°C/+ 752°F (+ 600°C/+ 1112°F if hermetically sealed)
Advantages
Wide application range at high temperatures
Immediate lubricating effect
Excellent emergency running properties due to especially selected solid lubricants
Optimum wear protection
Extreme load carrying capacity
Extraordinarily low coefficient of friction
Anti-corrosive
Good adhesion
Economical use
Additional Information
Clean surface. Apply a thin and even layer of MOLUB-ALLOY PASTE PU with a brush or a lintfree cloth. Remove excess
paste.
The product was previously named Optimol Paste PU. The name was changed in 2015.
Related products
English
Türkçe