CASTROL RUSTILO 66 VCI

Description

Castrol Rustilo™ 66 VCI is an oil type protective containing a vapour-phase corrosion inhibitor (VCI).

Application

Rustilo 66 VCI has been specifically designed for simultaneously cleaning and protecting ball and roller bearings. It is

also suitable for the protection of all types of delicate or highly finished engineering products, particularly those, which

contain moving parts and cannot be protected with greasy film coatings.

Rustilo 66 VCI can be applied by immersion in a suitably designed treatment tank, which should be covered when not in

use. It can also be applied by spray.

Advantages

Free from hydrocarbon solvents, supports compliance with EC Solvent Directive (1999/13/EC).

Heavy metals free (for example Barium), which may help to fulfil aspects of legislative requirements and waste

treatment requirements that specify that these chemicals are excluded.

Additional rust prevention through Vapour Corrosion Inhibitor. The maximum protection is achieved in

hermetically sealed packs (safe pack).

Contains no additives which inhibit the even distribution of oil and grease (e.g. silicone)

Very good age resistance enables long service life and ensures best cleanability even after temperature

exposure.

Compatible with most mineral oil and greases

Shows very good filtering properties

If required protective films of Rustilo 66 VCI can be removed by using a petroleum solvent or alkaline process

cleaner, all available from Castrol.

Additional Information

The claims on film thickness and consumption are average values. These are valid for smooth surfaces with good

drain-off characteristics and simple geometries without holes or recesses.

(*) "Indoor storage” describes the storage of ferrous components in closed store-rooms having a relative humidity of

60%. Increased protection times could be achieved when treating finished surfaces or store the parts in a sealed pack.

Storage

To avoid product deterioration always keep the container/drum tightly sealed. Store the product in a cool, dry place away

from direct sunlight. Prevent exposure to frost and avoid water ingress. For optimum product stability, it is preferable to

store the product indoors between 5°C and 45 °C / 41°F and 113°F.

Influence of temperature may cause some cloudiness, which is reversible and does not have an impact on product

quality or corrosion protection performance in most instances.