CASTROL CARECLEAN XHP

Description

Castrol Careclean XHP is a specialized cleaning fluid and corrosion inhibitor for extra high pressure spray wash systems.

It is specifically designed for use in totally enclosed industrial spray washers operating at 3,500 to 10,000 psi (240 - 690 bar). As a rust preventive, this fluid contains bi-metallic corrosion inhibitors to protect copper heat exchangers, pump parts and other equipment.

Advantages

• Low foam eliminates foam-outs in spray washers and enhances performance in transfer lines

• Excellent short-term corrosion protection

• Low pH reduces the possibility of skin irritations

• Highly resistant to bacterial and fungal attack

Concentration Control

By titration:

1. Place (pipette) 50 ml sample of CareClean XHP solution into a flask or beaker.

2. Titrate 1.0 N sulfuric acid from a burette until reaching 4.6 on the pH meter.

3. The concentration of the CareClean XHP solution in % (v/v) can be calculated by multiplying the volume of 1.0 N sulfuric acid in ml by the concentration factor.

4. Prior to running tests on field samples, follow the above method using a sample of known concentration to obtain the concentration factor.

Concentration factor = % known concentration/ml acid needed to reach the end point.

With Hach kit:

The table below reflects values obtained using a Hach alkalinity test kit (Cat. No 23145). For best results, follow the instructions for use provided in the kit.

User Advice

Careclean XHP is safe to use on ferrous metals. Consult your Castrol Sales Engineer for questions regarding compatibility.