BP Isocool SF Premix

Description

BP Isocool SF Premix is a long-life ready to use 50:50 pre-mixed coolant based on monoethyleneglycol with advanced organic acid inhibitor technology. In contrast to traditional antifreeze coolants, BP Isocool SF Premix does not contain amines, nitrites, phosphates, silicates or other inorganic inhibitors.

BP Isocool SF Premix provides excellent corrosion protection particularly to those engines employing light metals.

BP Isocool SF Premix works over a wide operating temperature range for effective engine cooling in all climates, and offers freezing protection down to -37°C.

Application

The special inhibitor package used in BP Isocool SF Premix enables longer drain intervals with excellent protection against corrosion, cooling system blockage, overheating and freezing. It is especially suitable for use in engines employing cast iron, aluminium , copper or combinations of these metals used in modern engine designs. It is

also compatible with all standard rubber hoses, gaskets and seals used within the cooling system.

BP Isocool SF Premix possesses a longer operational life by allowing extended drain intervals of 3 years plus. Longer drain intervals mean reduced cost and less possibility of harm to the environment.

BP Isocool SF Premix provides excellent protection against cavitation corrosion and effective water pump lubrication, reducing wear and noise.

The additive technology used in BP Isocool SF Premix prevents the build up of calcium deposits (scale) from use of hard water, thereby reducing possibility of radiator blocking and restricted flow of coolant. This technology also improves the fluids heat transfer properties ensuring engines run at optimum temperatures.

BP Isocool SF Premix contains a bittering agent to deter from accidental ingestion.

Product Performance Claims

ASTM D3306 (III)

ASTM D4985

ASTM D6210

Based on a coolant concentrate conforming to BS 6580:2010

Storage

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum markings. Products should not be stored above 60°C, exposed to hot sun or freezing conditions.