BP Isocool NF

Description

BP Isocool NF is an antifreeze concentrate formulated using monoethylene glycol and selected additives, free from nitrite, amine and phosphate inhibitors. It uses hybrid technology for the modern performance engines of cars and trucks.

This coolant should be used at concentrations of between 33% and 50% dilution with purified water to give optimum corrosion protection and freezing protection between -18°C and -36°C.

Application

BP Isocool NF has been developed to meet the growing demand from engine and vehicle manufacturers for a higher performance coolant that minimises environmental impact.

In the majority of cases, coolants are not compatible and should not be mixed with other coolants unless directed by the equipment manufacturer. If using BP Isocool NF for the first time, ensure that the cooling system has been adequately flushed with clean water.

Advantages

BP Isocool NF provides excellent protection against corrosion, and because it contains no phosphate, the problems of deposits in some modern performance engines are eliminated. In addition to providing excellent corrosion and low temperature protection, the use of the recommended level of antifreeze will significantly reduce the likelihood of wet

cylinder liner pitting due to "cavitation erosion". Cavitation erosion is caused by the implosion of air bubbles present in the coolant, which are attracted to the liner outer surface. These bubbles implode, resulting in the removal of minute amounts of liner material, this, if allowed to continue unchecked, will result in liner porosity and severe engine damage.

Protects for up to 3 years

Excellent low temperature protection

Provides excellent protection against corrosion

Efficient lubrication of water pumps

Compatible with conventional seal and hose materials used in engine cooling systems

Contains bittering agent.

Product Performance Claims

ASTM D3306(I),

ASTM D4985,

BS 6580:2010,

JASO JIS K2234:2006

Storage

Castrol Radicool NF shall be stored in air tight containers at a maximum tempertaure of 30°C. In warm climates containers should not be stored outside in direct sunlight. It can be stored in mild steel lacquer lined containers.

Galvanised containers and handling equipment should not be used.