BP Isocool NF Premix

Description

BP Isocool NF Premix is a ready to use engine coolant and antifreeze formulated using monoethylene glycol and selected additives, free from nitrite, amine and phosphate inhibitors. It uses hybrid technology for the modern performance engines of cars and trucks.

BP Isocool NF Premix requires no customer dilution therefore ensures the correct concentration is always used. BP Isocool NF Premix provides year round protection against corrosion, and offers freezing protection down to -37C.

Application

BP Isocool NF Premix has been developed using Hybrid Additive Technology to provide total protection for modern engine radiator systems, cylinder block heads, water pumps and heat exchangers .

In the majority of cases, coolants are not compatible and should not be mixed with other coolants unless directed by the equipment manufacturer. If using BP Isocool NF Premix for the first time, ensure that the cooling system has been adequately flushed with clean water before use.

Advantages

BP Isocool NF Premix has been developed to meet the growing demand from engine and vehicle manufacturers for a higher performance coolant that minimises environmental impact. It provides excellent protection against corrosion, and because it contains no phosphate, the problem of deposits in some modern performance engines is eliminated. In addition to providing excellent corrosion and low temperature protection, the use of the recommended level of anti-freeze will significantly reduce the likelihood of wet cylinder liner pitting due to "cavitation erosion". Cavitation erosion is caused by the implosion of air bubbles present in the coolant and which are attracted to the liner outer surface. These bubbles implode, resulting in the removal of minute amounts of liner material - this, if allowed to continue unchecked, will result in liner porosity and severe engine damage.

Some of the advantages of BP Isocool NF Premix are:

Protects for up to 3 years

Excellent low temperature protection

Provides excellent protection against corrosion

Efficient lubrication of water pumps

Compatible with conventional seal and hose materials used in engine cooling systems

Contains bittering agent

Product Performance Claims

ASTM D3306(III),

ASTM D4985

BS 6580:2010

JASO JIS K2234:2006

Based on coolant concentrate conforming to BS 6580:2010

Storage

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed to hot sun or freezing conditions