Mobil Delvac Xhp Le 10W-40 209 Litr

Product description

 Mobil Delvac XHP LE 10W-40 is a synthetic engine oil designed to provide extra high performance lubrication to modern, high performance and low emission diesel engines operating in heavy road conditions. This engine oil has been designed using high performance base oils that provide excellent fluidity at low temperatures and high temperature viscosity protection, evaporation control and improved fuel economy. It has a new additive system developed to extend the life of emission reduction systems such as DPF (Diesel Particle Filter) and maintain its efficiency. This system (DPF) is used by some truck manufacturers to meet Euro IV and future Euro V emission requirements.

Features and Benefits

 High efficiency, low emission engines significantly increased the level of performance expected from engine oils. Narrow tolerance engine designs reduced oil consumption, thereby reducing new oil additions, which increased falling additive levels. Thermal tensions in the oil increased with the use of intercoolers and turbochargers. Higher fuel injection pressure and ignition delay increase combustion efficiency while increasing engine temperatures, evaporation losses and soot load in the oil. The advanced technology of Mobil Delvac XHP LE 10W-40 oil provides exceptional performance and protection in exhaust emission systems using DPF (Diesel Particle Filter). Among the most important benefits of this oil are:

 Features Advantages and Benefits

 Superior protection against oil thickening, high temperature deposits, sludge formation, liner finishing, loss of oil properties and corrosion Less wear and long engine life Excellent sludge control at high temperature

 Excellent anti-wear properties Excellent protection against ring pinch

 Shear stability that preserves oil viscosity Very low evaporation loss Less viscosity change, heavy consumption under heavy working conditions at high temperature

Improved protection in exhaust systems with low ash level DPF (Diesel Particulate Filter)

 Excellent low temperature properties Improved pumpability and oil circulation Protection against initial working wear

Usage places

Naturally aspirated and turbocharged diesel engines manufactured by European manufacturers

Light and heavy duty vehicles working on road conditions

Modern heavy duty engines using DPF (Diesel Particle Filter).

Specifications and Approvals

 Mobil Delvac XHP LE 10W-40 meets or exceeds the following industry specifications: 10W-40

ACEA E6 X

ACEA E4 X

ACEA E7 X

API CI-4 X

JASO DH-2 X

DAF Extended Drain X

 Mobil Delvac XHP LE 10W-40 has the following builder approvals: 10W-40

MB-Approved 228.51 X

MB-Approved 228.5 X

MAN M 3477 X

MTU Type 3.1 X

Volvo VDS-3 X

Renault RVI RXD / RLD-2 / RGD X

Scania Low Ash X

Mobil Delvac XHP LE 10W-40 is recommended for applications where the following specifications are required:

MAN M 3277 (CRT) X

Typical Properties

 Mobil Delvac XHP LE 10W-40

SAE Class 10W-40

Viscosity, ASTM D 445

cSt @ 40 ° C 85

cSt @ 100 ° C 13.0

Viscosity Index, ASTM D 2270 153

Sulphated Ash, Weight%, ASTM D 874 1,0

Total Base Number, mg KOH / g, ASTM D 2896 12

Pour Point, ° C, ASTM D 97 -33

Flash Point, ° C, ASTM D 92 228

Density @ 15 ° C, kg / l, ASTM D 4052 0.865

Health and Safety

 In the light of current information; This product is not expected to have a negative impact on human health when used in the intended locations and following the recommendations provided in the Safety Data Sheet (MSDS). MSDSs can be provided from the main distributor or via the Internet upon request, or provided by the seller if deemed necessary and when deemed necessary by law. This product should not be used for its intended purpose. When disposing of used products, be careful about environmental protection.