CASTROL Radicool

Description

Castrol Radicool is a concentrated engine coolant for use in both petrol and diesel engines with aluminium or cast iron engines. This coolant can be mixed using 33% concentration with purified water to give frost protection to -18°C, however it is recommended to use a 50% dilution to provide optimum corrosion protection and freeze protection down to -36°C. At these concentrations this coolant will provides year round protection. To maintain optimum performance this product should be replaced after 1 year.

Application

Castrol Radicool has been developed for use in both petrol and diesel engines with aluminium or cast iron engines.

In the majority of cases, coolants are not compatible and should not be mixed with other coolants unless directed by the equipment manufacturer. If using Castrol Radicool for the first time, ensure that the cooling system has been adequately flushed with clean water before use.

Advantages

Castrol Radicool is a mixture of monoethylene glycol and selected chemical agents. It contains no nitrites, amines or phosphates.

Castrol Radicool provides -

Protection against hard water

Effective engine cooling without boiling

Protection against corrosion of the alloys used in the cooling system of modern vehicles

Compatibility with conventional seal and hose materials used in engine cooling systems

Protection against cavitation corrosion

Efficient lubrication of water pumps

Contains bittering agent

Castrol Radicool contains no phosphate, therefore the potential problems of deposits in some modern engines are

reduced.

Product Performance Claims

D3306

BS 6580:2010

NBR 15297

IRAM 41368

Storage

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed to hot sun or freezing conditions.