CASTROL Hysol DC 30

Description

Castrol Hysol ™ DC 30 is a semi-synthetic, high-performance, chlorine-free coolant. It contains a package of additives that work in synergy allowing to obtain good performances on machine tools together with an improvement of the surface finishes of the machined pieces; at the same time it guarantees good product stability in terms of biostability and a reduction in processing costs.

Applications

Castrol Hysol DC 30 is specially designed for machining cast iron and low to medium alloyed steels.

It can be used both in single tanks and in centralized systems.

Advantages

• Product free from chlorine and nitrites.

• Effective inhibition of bacterial and fungal growth for a good duration of the charges.

• Reduced foaming in the recommended water hardness conditions.

• High anti-rust power that guarantees good protection of both the machine and the parts.

• Advanced blend of lubricants, increases tool life and improves part quality.

• The excellent detergency guarantees clean parts and reduced consumption.

• Multi-functional product for operations on different metals.

Storage

To avoid product deterioration it is recommended to keep the packaging sealed. Avoid any infiltration of water and protect from frost. Keep in a cool and dry place, away from direct sun, preferably indoors. For further details it is advisable to refer to the safety data sheet of the product.

Note

When using Hysol DC 30 for the first time, it is advisable to clean and sterilize the coolant circulation system. For this purpose, the use of TECHNICLEAN MTC 43 is effective, which must be added at a rate of 1.5% in the emulsion to be replaced, for about 8-12 hours before the change, without the machine having to be interrupted. At the end of the operation it is necessary to empty all the circuits, remove any deposits and rinse with water. The above operation is also advisable when replacing very aged or very degraded emulsions