Motul Mocool - 500 ml

Motul Mocool

Engine Cooling Additive Concentrated coolant with superior thermal conductivity, reducing engine temperature by 15 ° C (30 ° F).

USAGE:

All kinds of motorcycles, cars, ATVs, etc. can be used in the cooling system. It is used to reduce engine operating temperature in systems where high temperature is observed or used in racing environment.

CAUTION: Under certain racing rules, it is not permitted to add any additives other than water to the cooling systems of the vehicles. If in doubt, always contact the racing authorities before using MoCool. MOTUL cannot be held responsible for any illegal use of MoCool. MoCool does not provide anti-freeze protection!

PERFORMANCE:

The engine runs colder than 15 ° C (30 ° F). It increases the heat transfer and exchange and increases the efficiency of the engine cooling system.

Optimum protection against corrosion and corrosion in the cooling system. Recommended for use in magnesium, aluminum alloys, cast iron, copper, brass and bronze systems. Despite its high temperatures and long service life, its anti-corrosive properties remain intact. Low rust inhibitor consumption due to long change intervals. Water protects the circulation pump and does not allow scouring and abrasion. Does not damage seals, seals and other plastic parts.

RECOMMENDATIONS: MOTUL MoCool is a concentrated protective fluid. It can be mixed with distilled (purified) water and used for instant cooling effect. Mix 5% with water (20: 1) Do not use this product without reconstitution! Do not use tap water or drinking water. It can be mixed with many coolants based on mono ethylene glycol.