Mobilube GX-A 80W - 208 Litre Fıçı

Mobilube GX-A 80W

It is an automotive type gear oil formulated from high performance base oils and an advanced additive system. This oil is designed for commercial transmissions, axles and final drives where protection against wear and scraping is required. Provides excellent performance where API GL-4 specification is required.

Features and Benefits

Today's gearbox applications bring high performance expectations from oils. Higher speeds, higher torque and heavier loads require improved formulations to optimize operating costs and maximize machine life. Longer service maintenance intervals create additional demands on gear oils, necessitating the use of effective base oil and additive systems. Mobilube GX-A 80W is designed to meet these requirements. Its main benefits are as follows:

Features Advantages and Potential Benefits

Thermal stability and resistance to high temperature oxidation Long gear and bearing life due to less deposit formation

Longer seal life

Excellent protection against rust and corrosion Longer component life

Good lubrication at low temperature Less wear at start-up and easier start-up

Compatibility with automotive seals and seals Minimum leakage and reduced contamination

Usage places

Manual transmissions and drive axles requiring API GL-4 level performance

Light and heavy duty trucks and commercial vehicles operating under road conditions

Construction, mining, quarries and agricultural areas where land conditions exist

Other industrial, commercial and automotive applications with hypoid gears operating in medium and heavy duty conditions

Specifications and Approvals

Mobilube GX-A 80W meets the following industry and manufacturer specifications:

API GL-4

Mobilube GX-A 80W has the following manufacturer's approvals:

MB-Approval 235.1

ZF TE-ML 02A / 08A / 17A

MAN 341N

Typical Properties

Mobilube GX-A 80W

SAE Class 80W

Viscosity, ASTM D 445

cSt @ 40 C 76

cst @ 100 C 10.0

Viscosity Index, ASTM D 2270 104

Pour Point, ºC, ASTM D 97 -33

Flash Point, ºC, ASTM D 92 216

Density @ 15ºC kg / l, ASTM D 4052 0.890

Health and Safety

In the light of available information, this product is not expected to cause adverse effects on human health when used in the intended places and the recommendations provided in the Safety Data Sheet (MSDS) are followed. MSDSs can be provided on demand from the main distributor or via the internet. This product should not be used out of its purpose. Be careful about protecting the environment while disposing of used products.