CASTROL Braycote Inertox 500-2

Description

Castrol Braycote™ Inertox Range (previously called Castrol Interox™ Range) are chemically and thermally stable hightemperature greases on a fully synthetic basis. There are universally applied for long-term lubrication of rolling and

sliding bearings especially when exposed to hostile ambient conditions. The range consists of Braycote Inertox 400-1(

previously called Inertox Light), Braycote Inertox 500-2 (previously called Inertox Medium), Braycote Inertox 240-2

(previously called Inertox Medium 150) and Braycote Inertox 2 (previously called Inertox Heavy).

Application

For rolling and sliding bearings with extremely extended relubrication intervals such as in:

Film stretching machines

Tenter frames for textiles

Oven carriages in the ceramics industry

For high-temperature lubrication of rolling and sliding bearings.

Under hostile ambient conditions.

Pumpable in central lubrication systems.

Temperature application range: -25°C to +260°C (at higher operating temperatures adequate ventilation must be

ensured!)

Conditions of Use

Braycote Inertox Range must not be mixed with other lubricants.

Clean the lubrication surfaces thoroughly with e.g. petroleum ether before application.

Advantages

Excellent thermal stability.

High wear protection and good load carrying capacity.

Good corrosion protection.

Non-flammable.

Inert

Braycote Inertox 500-2 and Braycote Inertox 240-2 are approved for gas devices (DVGW)

Resistant to:

Hot and cold water, oils, oil-in-water emulsions.

Inorganic and organic acids and alkaline solutions.

Solvents based on hydrocarbons, e.g. naptha, benzene, toluol, paraffin etc.

Solvents based on chlorinated hydrocarbons, e.g. trichloroethylene (TRI), perchloroethylene (PER),

dichloromethane (methylene chloride) etc.

Alcohols, ketones (acetone), halogens.

Radioactive radiation (gamma rays)