Mobil Gear Shc 6800 - 208 Litr

Product description

Mobil Gear Shc 6800 is a high performance ultra high viscosity synthetic lubricant designed specifically for use under heavy loads and mainly in gears with boundary lubrication conditions. They are formulated using synthetic-based base oils that exhibit unmatched low temperature fluidity even in high viscosity grades. These ultra high viscosity products can be pumped over long distances and used for standard spray lubrication of equipment. High viscosity indices and unique additive systems have given these products unique thermal / oxidation properties and have been provided with excellent performance at both high and low operating temperatures even with very slow speed gears. Additive formulation also provides protection against rust and corrosion with excellent EP and abrasion protection performance.

Mobil Gear Shc 6800 meets the minimum viscosity requirements set by Falk Corporation for intermittent gear lubrication for the winter and summer class. Although these oils are not asphaltic and are synthetic products, they also meet the viscosity requirements determined by AGMA 14R and 15R lubricant numbers. Mobil Gear Shc 6800 does not contain any solvent refined or asphaltic base oil.

Features and Benefits

Mobil Gear Shc 6800 lubricants are among the leading products of SHC brand products that have gained worldwide fame in terms of their innovations and performance. These scientifically designed synthetic oils are an indication of our determination to use advanced technology to offer consumers unique lubricant products. Mobil Gear Shc 6800 oils not only offer the benefits that mineral base oils cannot provide (especially in operating conditions under extreme hot or cold temperatures), but are also excellent products that provide superior performance and customer benefits.

Our scientists responsible for product formulation have developed this innovative composition, which combines special additives that strengthen the base oil to achieve excellent EP and wear protection properties even under shock loading conditions. The lubricants thus obtained have excelled in terms of equipment manufacturers' reviews, customer field tests and commercial use. These ultra high viscosity products are particularly suitable for conditions with low rpm, high loads and high temperatures, and offer excellent gear and bearing protection, long oil life and excellent use all year round compared to traditional products.

The exclusive features and potential benefits of Mobil Gear Shc 6800 are given below:

Features

Advantages and Benefits

With its thick EHL fluid film formation and special additives, it provides unique load-bearing, anti-wear and adhesion properties.

Extends gear life, reduces downtime, reduces maintenance and spare parts costs

Does not cause solvent retention and low viscosity problems in solvent type products

Creates thicker EHL film thickness than semi-fluid grease products

Excellent pumpability at ambient temperatures

Reduces pump replacement costs

Can be used in existing oil spray equipment

Reduces system conversion cost from asphalt type or semi-grease products

Less usage than greases, less waste than asphalt / solvent based products

Oil consumption is reduced and cost of disposal

Does not contain solids or asphalt resin

Lack of solid deposits on the bottom of the tooth reduces downtime and maintenance costs

Light-colored product

Does not require cleaning before gear checking

Does not contain solvent

It is more safe because it does not contain solvent

Usage places

Application Principles: Normally, conversion from asphalt type or grease products to Mobil Gear Shc 6800 is a simple process that does not involve any changes in spraying equipment. It is recommended to clean the gears thoroughly to take advantage of the light colors of these synthetic products. Consult your Mobil representative for oil conversion.

Mobil Gear Shc 6800 is specially used for lubrication of open gear systems used in drive units of heavy-duty, low-speed, stationary rotary machines. Product application is made with a spray system. Among its special applications are:

    * Kilns and grinders and sugar production facilities in mining, cement and limestone production

    * Low speed, heavily loaded flat bearings and bearings

Health and Safety

In the light of the available information, this product is not expected to have a negative impact on human health when used in the intended locations and following the recommendations provided in the Safety Data Sheet (MSDS). MSDSs are available upon request from the main distributor or via the internet. This product should not be used for its intended purpose. When disposing of used products, be careful about environmental protection.