Shell Malleus oils are high performance, anti-wear, synthetic polyalkylene glycol-based gear oil that provides high protection especially against micro-pitting.
Compatibility with seals and paints:
High quality epoxy paints are recommended. Viton is primarily preferred
nitrile materials can also be used.
Exchange procedure:
Shell Malleus polyalkylene glycol is a base oil product. Therefore
should not be mixed with mineral oils. When switching from mineral oil to Malleus
great care should be taken. The system should be flushed with a very small amount of Malleus.
The system should be run without load and drain while the oil is hot. Ideal
sealing elements should also work with mineral oils
It must be replaced. Necessary checks after a few days of use
It should be done.
Shell Malleus should not be mixed with some other polyalkylene glycol products.
For this reason, maximum attention to additions to other products
It must be shown. The recommended method is to completely empty the old product.
Malleus is used after shushing.