Mobil DTE H 37
It is a quality hydraulic system oil with high anti-wear power and can meet the needs of a wide variety of hydraulic equipment. It provides long oil / filter life and optimum equipment protection, reducing both maintenance and waste costs. It has been formulated to meet the needs of hydraulic systems operating under harsh conditions using high pressure and flow pumps and the critical expectations of hydraulic system parts such as servo valves operating in narrow tolerances.
Features and Benefits
Mobil DTE H 37 hydraulic oil helps extend oil and filter change intervals thanks to its high oxidation resistance. Thanks to its anti-wear and film strength, it provides optimum equipment performance, not only reducing equipment failures, but also increasing production capacity. Thanks to its controlled water separation feature, it neutralizes the small amount of water that may leak into the system and easily separates the high amount of water.
Features Advantages and Potential Benefits
Anti-Wear Reduces Wear Protects systems with a variety of metals
Oxidation resistance Provides long oil and equipment life Extends filter life
Prevents internal corrosion of hydraulic systems Reduces the negative effects of moisture on the system Protects multi-metal designed parts against corrosion
Corrosion prevention
Protects systems with a small amount of moisture
Quickly separates large quantities of water
Leaving the Water
Usage places
High pressure / power generating hydraulic systems with screw and vane pumps
Systems requiring high load carrying and anti-wear
• Applications where thin oil film protection is expected to serve as a small amount of water cannot be prevented.
• Hydraulic systems where it is desirable to use an oil with a kinematic viscosity of 37 mm2 / s.
Specifications and Approvals
Mobil DTE H 37 is suitable for use in applications where the following specifications are desired:
ISO 11158 Type HM (1) X
DIN 51 524-2 (1) X
Vickers M-2950-S (1) X
Vickers I-286-S (1) X
Denison HF-O (1) X
Mobil DTE H 37 meets the following specifications
Suitable for use in desired applications:
(1) Mobil DTE H 37 kinematic viscosity typical 37.0
It is a product of mm2 / s and its viscosity
difference in specifications from ISO 32 and 46 classes
Although it does, it shows the same performance.
Typical Properties
Mobil DTE H 37
Viscosity, ASTM D 445
cSt @ 40 C 37 Typ.
cSt @ 100 C 5 Min.
Viscosity Index, ASTM D 2270 109
Pour Point, ºC, ASTM D 97 - 18 Max.
Flash Point, ºC, ASTM D 92 175 Min.
Density @ 15 ºC kg / l, ASTM D 4052 0.871
Health and Safety
In the light of available information; This product is not expected to cause adverse effects on human health when used in places intended and when the recommendations provided in the Safety Data Sheet (MSDS) are followed. MSDSs can be provided on request from the main distributor or via the Internet. This product should not be used out of its purpose.
When disposing of used products, be careful about protecting the environment.