Mobil Wyrol H 15 - 208 L

WYROL H 15

Hydraulic Oils

Product description

WYROL H Series oils are designed for use in rolling hydraulic systems. They are formulated with non-dyeing base oil and combined with shear-stable ingredients to achieve the desired viscosity. Specially selected additives provide good wear protection, oxidation stability and rust prevention properties. They exhibit very low dyeing properties compared to conventional hydraulic fluids. Contamination of rolling oils with conventional hydraulic fluids can cause painting problems annealing.Wyrol H US FDA 21 CFR 178,3910 (a) "Surface Lubricants used in the manufacture of metal articles" also shows on finished metal after suitable for foil or sheet stock rolling for food applications is also used. Therefore, products such as foil can be used as aluminum rolling hydraulic fluids, for use as food packaging materials.

Features and Benefits

WYROL H oils offer low painting performance when rolling mills demand on aluminum or yellow metals. Their low dyeing disposition and clean annealing performance significantly reduce this problem. In addition, WYROL H oils provide very good anti-wear protection and oxidation stability resulting in long hydraulic system component life and long oil service ability.

Low production rejects dyeing properties reduce potential

Good anti-wear properties reduce hydraulic system component wear and extend the service life

High resistance to oxidation system reduces deposits and extends oil life by reducing maintenance costs

Apps

Cross-contamination of conventional hydraulic oils with roller oils can cause painting problems for aluminum rolling mill applications or yellow metals recommended

Suitable for use in viscosity grades 15 and 32 mill low and high pressure hydraulic systems

Specifications and Approvals

Wyrol H meets or exceeds: 15 to 32

FDA 21 CFR 178.3910 (a) X X

Typical Properties

Wyrol H 15 32

15 º C, kg / m3, ASTM D 4052 Density 840 850

Kinematic Viscosity at 40 º C, ² / s mm, ISO 3104 15 32

100 º C Kinematic Viscosity, ² / s mm, ISO 3104 4.2 7.3

Yield Point, º C, ISO 3016 -18 -18

Flash Point, PM, º C, ISO 2719 130 130

Copper Corrosion, 3h, 100 º C, rating, ISO 2160 1 1

Rust Prevention, distilled water, ISO 7120 Pass Pass