Description
Castrol Techniclean™ 90 XBC is an aqueous, low alkalinity, industrial process cleaner containing surfactants and
corrosion inhibitors.
The product is formulated without inorganic salts, formaldehyde releasing agents and monoethanolamine (MEA).
Application
Techniclean 90 XBC is designed for inter-operational and final process cleaning operations of ferrous and aluminium
goods, suited for use in a wide range of modern spray, high pressure spray and intensive flood wash equipment.
This cleaner effectively removes residues from parts and components after machining with soluble oils, light duty neat
cutting or forming oils as well as thin corrosion preventive films, lubrication oils, swarf and general dirt.
Techniclean 90 XBC is formulated to be compatible with the Castrol Alusol XBB and Hysol XBB coolant ranges.
When applied in cleaning processes after machining with Alusol and Hysol XBB coolants the used cleaner solution can
be recycled to the previous XBB coolant emulsion system.
Though the product is particularly developed for in-process cleaning, Techniclean 90 XBC is also well suited for
maintenance machine tool cleaning.
Advantages
Leaves a thin temporary corrosion preventive film on the metal surface after drying – minimizes scrap rate which
improves productivity
Effectively minimises excessive foam – reduces costly risk of dangerous cavitations/damage of high-pressure
pumps
Excellent demulsifying properties provide easy skimming and long bath life – can help to reduce maintenance
and disposal cost
Suitable for low temperature cleaning operations - can support sustainability agenda, i.e. helping to reduce
energy cost and to improve CO2 footprint
Versatile; multi-metal compatibility and suitable in hard and soft water – enables possible product consolidation
Possibility of recycling the used cleaning solution into the Alusol and Hysol XBB coolants - can help to reduce
operational cost through lowering waste volume and reducing fresh water consumption
Concentration Control
By titration:
1. Pipette 10 ml bath solution in a 250 ml Erlenmeyer flask and add 50 ml deionised DI-water
2. Add 2 drops of indicator solution nitrazine yellow
3. Titrate with hydrochloric acid (c = 0.1 ml/l) until colour changes from blue to yellow
4. Calculation: Concentration in % = required ml hydrochloric acid * factor 0.63
Additional Information
In case of recyling the used cleaners solution into the coolant system the concentration of the emulsion is maintained by
adding Alusol XBB or Hysol XBB concentrate up to the set level.
For further advice please contact your local Castrol representative.
Storage
To avoid product deterioration always keep the container/drum tightly sealed. Store the product in a cool, dry place away
from direct sunlight. Prevent exposure to frost and avoid water ingress. For optimum product stability, it is preferable to
store the product indoors between 5°C and 45 °C / 41°F and 113°F.