Mobil Gear OGL 007 - 208 Litr

Product description

Mobilgear OGL 007 is a high performance, semi-liquid lubricants containing fine pressure graphite as well as extreme pressure (EP) additives for load carrying purposes. These are mainly for gears of large size, low and medium speeds and working under heavy loads. It is formulated for excellent adhesion and resistance to "skidding" under difficult conditions, as well as providing a unique load-bearing property.

Mobilgear OGL 007 does not contain lead and chlorine and does not contain any solvent or diluent. Thanks to the absence of solvents or diluents, these products retain all their properties during storage and use. Low temperature properties and pumpability, which are among the features of Mobilgear OGL 007, allow spray application under a wide range of conditions.

These products can be easily pumped into spray nozzles by pulling them from the barrels through conventional transfer pumps.

Features and Benefits

Mobilgear OGL 007 is among the leading members of the Mobilgear brand family of products that have earned a reputation for worldwide performance and innovative features. Developed by ExxonMobil research experts and supported by worldwide technical support staff, Mobilgear OGL 007 provides excellent protection and performance in large-size open gear systems used in a wide range of industrial applications.

Mobilgear OGL 007 was developed to meet the demands and customer requirements of original equipment manufacturers who prefer to use semi-liquid grease for heavy loads in low and medium speed open gears. Among the critical demands expected from this type of products is to stay between gears under heavy loads and to protect against surface wear and damage. Mobilgear OGL 007 is formulated with special quality very fine grained graphite developed by our researchers to significantly contribute to the elasto-hydrodnamic (EHL) oil film thickness in large-size open gear systems operating under high load / low speed conditions.

Features

Advantages and Benefits

Special formulation that provides unique load-bearing and wear protection Provides superior wear protection, reduces gear replacement cost

Excellent pumpability and sprayability Efficient operation ensures easy low temperature start-up and low energy consumption

Superior protection against rust and corrosion Extends equipment life, reduces downtime and reduces maintenance costs

Very good adhesion property Less deflection, reduces losses and reduces oil costs

Does not contain lead, nitrate and solvent Low impact on the environment

Usage places

Mobilgear OGL 007 is used for large-sized, low and medium speed heavy duty gears under heavy loads, including the following industrial applications:

Gears operating in high temperature conditions in the mining industry, including ring gears in cement kilns and cement mills

Gear applications in iron and steel, cement, paper and chemical industry

Typical Properties

Mobilgear OGL

007

NLGI Class 00 - 0

Color Black

Processed Penetration, 25ºC, ASTM D 217, mm / 10 405

Dropping Point, ºC, ASTM D 2265 200

Base Oil Viscosity, ASTM D 445

cSt @ 40ºC 460

FZG Load Test, DIN 51354, A / 2.76 / 50

Load rank 12+

Abrasion, mg / KWh 0.25

4-Ball Wear Test, ASTM D 2266, mm 0.5

4-Ball Boiling Test, ASTM D 2596, Boiling Load, kg 800+

Pass Test, ASTM D 1743 Pass

Health and Safety

In the light of current information; This product is not expected to have a negative impact on human health when used in the intended locations and following the recommendations provided in the Safety Data Sheet (MSDS). MSDSs are available upon request from the main distributor or via the Internet. This product should not be used for its intended purpose. When disposing of used products, be careful about environmental protection.