Mobil Gear OGL 007 - 208 Litre

Product description

Mobilgear OGL 007 are high performance, advanced technology semi-liquid lubricants that contain extreme pressure (EP) additives as well as fine-grained graphite for load carrying purposes. These are mainly for gears with large sizes, low and medium speeds and working under heavy loads. In addition to providing unmatched load-bearing properties, it has been formulated for excellent adhesion under extreme conditions and resistance to "skidding".

Mobilgear OGL 007 is lead and chlorine free and does not contain any solvents or diluents. Thanks to the lack of solvent or diluent, these products preserve all their properties during storage and use. Mobilgear OGL 007 features low temperature properties and pumpability that allow it to be sprayed under a wide range of conditions.

These products can be easily pumped into spray nozzles by pulling from barrels via conventional transfer pumps.

Features and Benefits

Mobilgear OGL 007 is one of the leading members of the Mobilgear brand family of products, which have gained a worldwide reputation for performance and innovation. Developed by ExxonMobil research experts and supported by worldwide technical support staff, Mobilgear OGL 007 provides excellent protection and performance in large open gear systems used in a wide range of industrial applications.

Mobilgear OGL 007 was developed to meet the demands and customer requirements of original equipment manufacturers who prefer to use semi-fluid grease for heavy loads in low and medium speed open gears. Among the critical demands expected from these types of products are the ability to stay between gears under heavy loads, and to protect against surface wear and damage. Mobilgear OGL 007 is formulated with special quality very fine-grained graphite developed by our researchers to significantly contribute to the elasto-hydrodnamic (EHL) oil film thickness in large-size open gear systems operating under high load / low cycle conditions.

Features

Advantages and Potential Benefits

Special formulation providing unique load carrying and wear protection Provides superior protection against wear, reduces gear replacement costs

Excellent pumpability and sprayability Provides efficient operation, easy start-up at low temperature and low energy consumption

Superior protection against rust and corrosion Extends equipment life, reduces downtime and lowers maintenance costs

Very good adhesion less blown, reduces losses and lowers oil costs

Does not contain lead, nitrate and solvent Low impact on the environment

Usage places

Mobilgear OGL 007 is used in large size, low and medium speed, heavy duty gears under heavy loads, including the following industrial applications:

Gears operating under high temperature conditions in the mining industry, including ring gears found in cement kilns and cement mills

Gear applications in the iron and steel, cement, paper and chemical industry

Typical Properties

Mobilgear OGL

007

NLGI Class 00 - 0

Color Black

Penetration Worked, 25 ºC, ASTM D 217, mm / 10 405

Dropping Point, ºC, ASTM D 2265 200

Base Oil Viscosity, ASTM D 445

cSt @ 40 C 460

FZG Load Test, DIN 51354, A / 2.76 / 50

Load Stage 12+

Abrasion, mg / KWh 0.25

4-Ball Abrasion Test, ASTM D 2266, mm 0.5

4-Ball Boiling Test, ASTM D 2596, Boiling Load, kg 800+

Rust Test Passes ASTM D 1743

Health and Safety

In the light of available information; This product is not expected to cause adverse effects on human health when used in places intended and when the advice provided in the MSDS is followed. MSDSs can be provided on demand from the main distributor or via the Internet. This product should not be used out of its purpose. Be careful about protecting the environment while disposing of used products.