Product description
Mobil Vacra Oil No 1 are high performance general purpose oils designed to be used in non-critical industrial applications such as lossy systems where lubrication is applied intermittently or when contamination and oil leakage cannot be prevented. In such services, an economical solution is provided compared to high-quality oils developed for flat and ball bearings, gear applications and hydraulic systems, both in circulation and lossy systems and where high-quality anti-wear products are not required.
These oils are formulated with high quality base oils and additives that provide resistance against oxidation and thermal degradation, and prevent rust and corrosion. Mobil Vacra Oil No 1 oils are preferred by many operators around the world to meet the demands of economical oil that can be used in a wide range of industrial applications.
Features and Benefits
Mobil Vacra Oil No 1 oils provide a wide range of benefits that contribute to the reduction of operating and maintenance costs. Its benefits are as follows:
Features Advantages and Potential Benefits
Contributes to the reduction of deposit formation and filter pollution
Very good thermal / oxidation and chemical stability
Cleans the system, extends filter life and reduces maintenance costs
Excellent protection against rust and corrosion
Prevents pump cavitation and improves circulation efficiency
Resistance to foam formation
Wide range of applications Reduces inventory costs and risk of misapplication
Usage places
Mobil Vacra Oil No 1 oils are general-purpose oils recommended for intermittent non-critical industrial applications or when contamination and oil leakage cannot be avoided. These provide excellent lubrication for plain and ball bearings. These oils are also recommended for medium duty conditions where high levels of leakage require frequent oil top-up. These products should not be used in conditions where average oil temperatures are above 66ºC. Special application areas include the following:
Medium duty industrial gear applications
Central lubrication systems that do not require anti-wear properties
Paper machines ranging from low to medium duty
• Non-critical machine tools, many air compressors and other flat and ball bearing applications.
Typical Properties
Extra BB AA HH
Heavy
Vactra Oil Series Light Medium Heavy
ISO Viscosity Grade 32 46 68 100 150 220 320 460
Viscosity, ASTM D 445
cSt @ 40 C 32.0 46.0 68.0 100 150 220 320 460
cSt @ 100 C 5.0 6.7 8.7 11.1 14.8 18.8 23.9 30.1
Viscosity Index, ASTM D 2270 97 97 98 98 96 95 95 95
Pour Point, C, ASTM D 97 -27 -24 -15 -15 -9 -6 -9 -6
Flash Point, ºC, ASTM D 212 242 266 246 280 288 286 296
92
Density @ 15ºC kg / l, ASTM 0.87 0.88 0.88 0.89 0.89 0.89 0.90 0.90
D 4052
Rust Test, ASTM D665
Distilled Water Ok Ok Ok Ok Ok Ok Ok Ok
Seawater Pass Passing Passing Passing Passing Passing
Demulsibility, ASTM D 1401, 5 10 15 25 - - - -
Minimum 3ml at 54 C
emulsion
Demulsibility, ASTM D 1401, - - - - 15 20 25 30
Minimum 3ml at 82 C
emulsion
Foam Test, ASTM D 892, Seq 0/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0
I, Tendency / Stability, ml / ml
Health and Safety
In the light of available information, this product is not expected to cause adverse effects on human health when used in the intended places and the recommendations provided in the Safety Data Sheet (MSDS) are followed. MSDSs can be provided on demand from the main distributor or via the internet. This product should not be used out of its purpose.
When disposing of used products, be careful about protecting the environment.