Mobilube 1 Shc 75W-90 208 Litre Fıçı

₺0.00 (tax incl.)

Reference:

Brand:

Description

Mobilube 1 SHC 75W-90

It is a fully synthetic, super performance commercial gear oil formulated with advanced technology base oils and state of the art additive system. This product is designed for manual heavy-duty transmissions and rear axles used in applications requiring gear oils with relatively higher viscosity and excellent load carrying capacity, wide temperature ranges and applications where extreme pressure and shock loads are expected. Mobilube 1 SHC 75W-90 features higher thermal and oxidation stability, higher inherent Viscosity Index (VI), extremely low pour point and better low temperature fluidity.

The modern technology behind Mobilube1 SHC 75W-90 oil provides optimum protection against temperature degradation and oxidation, wear and corrosion, in addition to the outstanding viscosity-temperature properties required for wide temperature range applications, as well as shear stability, long service life and fuel savings. . This product has been formulated to provide an inherently higher viscosity index using synthetic base oils to provide stronger film strength at high temperatures than mineral oils without the addition of VI improvers. Since the product maintains its fluidity at sub-zero temperatures without channeling, this technology also ensures effective lubrication. Mobilube 1 SHC

75W-90 meets or exceeds API MT-1 / GL-4 / GL-5 gear oil service ratings.

Features and Benefits

Today's technology has greatly improved the load, torque and speed performance and control capabilities of heavy-duty equipment operating on highways and in field conditions, thanks to innovative powertrain designs. These designs have changed and increased the expectations from the lubricants in order to meet the needs for superior performance, increase efficiency and reduce operating costs. Friction control in order to achieve longer gear and seal life, smooth operation, better fuel economy and high load / high torque capacity in wide application areas where heavy duty final drives are operating,

It is imperative that features such as protection against wear, thermal stability, shear stability, protection against rust and corrosion and protection of sealing elements are balanced at an optimum level. Mobilube 1 SHC 75W-90 was developed to deliver exceptional performance in heavy-duty powertrains and the lowest total operating cost associated with lubrication. Its main benefits are as follows:

Features Advantages and Potential Benefits

Longer gear and bearing life as a result of minimizing deposits

Outstanding thermal stability and resistance to oxidation due to high temperatures

Longer seal / seal life

Outstanding protection against low speed / high torque wear, scaling and increased load carrying capacity high speed engine wear

Low maintenance costs and longer equipment life

Prevents corrosion by maintaining its viscosity and film strength under difficult operating conditions.

Excellent cutting stability

Features Advantages and Potential Benefits

Increased synchromesh performance and longer component life

Excellent protection against rusting, discoloration and corrosion of copper and its alloys

Increased fuel savings and easier gear shifting

Enhanced friction properties

Less wear and easy start-up even in arctic conditions

Exceptional fluidity at low temperatures compared to mineral oils

Single oil use in heavy duty manual gearboxes and rear axles

Wide versatility

Good resistance to foaming Preservation of film strength for effective lubrication

Compatible with typical automotive seals and gaskets Minimum leakage and less contamination

Usage places

Heavy-duty manual transmissions and axles requiring API GL-4, GL-5 and MT-1 level performance

Light and heavy duty trucks, buses, minibuses and automobiles used on the road

• Industries such as construction, quarrying and agriculture working under land conditions

• As the first filling, leveling and refilling oil in transmissions, axles and other applications where API GL-4, GL-5 and MT-1 oils are used or medium extreme pressure gear oils are recommended.

• Not designed for automatic, manual or semi-automatic transmissions where engine oil or automatic transmission oils are recommended

Recommended for applications where long maintenance intervals and a long warranty are required

Specifications and Approvals

Mobilube 1 SHC 75W-90 meets or exceeds the following industry and manufacturer specifications

passes:

API GL-4 / GL-5 / MT-1 X

ZF-TE-ML 02B / 05B / 07A / 12B / 16F / 17B X

MAN 3343 Type SL X

Scania STO 1.0 X

Typical Properties

Mobilube 1 SHC 75W-90

SAE Class 75W-90