Mobil Jet Oil 2 208 Litre

₺0.00 (tax incl.)

Usage places:

* Aviation Sector

* In Turbine Motors

* In Jet Engines

Product description

Mobil Jet Oil II is a high performance aircraft gas turbine oil formulated with a combination of extremely stable synthetic based liquid and a unique chemical additive package. Its combination provides superior thermal and oxidation stability against both liquid and vapor phase degradation and deposit formation, as well as excellent foam durability. Mobil Jet Oil II has an effective operating range between -40 ° C (-40 ° F) and 204 ° C (400 ° F).

Features and Benefits

Mobil Jet Oil II aircraft-type gas turbines operating on a wide range of severe operating conditions are formulated to meet the demanding requirements. The product has a high specific heat in order to ensure good heat transfer to oil-cooled engine parts. In extensive laboratory testing and temperatures up to 204 º C (400 º F), Mobil Jet Oil II exhibits excellent bulk oil stability in flight performance. At these temperatures the evaporation rate is low enough to prevent excessive loss of volume. Its key features and benefits are:


Advantages and Potential Benefits

Excellent thermal and oxidation stability reduces the formation of carbon and sludge beds

Keeps engine efficiency and extends engine life

Excellent wear and corrosion protection prolongs gear and bearing

Reduces engine maintenance

maintains viscosity and film strength over a wide temperature range provides effective lubrication at high temperatures

Chemically stable reduces evaporation losses and oil consumption

Low pour facilitates start-up point in low ambient temperature conditions


Mobil Jet Oil II is recommended for turbo-jet, turbo fan, turbo-prop and aircraft gas turbine engines, and turbo shaft (helicopter) commercial and military service types. It is also recommended for aircraft type gas turbine engines used in industrial and marine applications.

Mobil Jet Oil II is certified against US Military Specifications MIL-PRF-23699. It is also compatible with meeting other synthetic gas turbine lubrication MIL-PRF-23699. Mobil Jet Oil II causes loss of some of the performance properties of the blend. However, mixing with other products is not recommended.

Mobil Jet Oil II is compatible with F Rubber (Viton A), H Rubber (Buna N) and silicone gasket materials, as well as all metals used in gas turbine construction.

Specifications and Approvals

Mobil Jet Oil II has the following builder approvals:


-Honeywell / Lycoming-Turbine Engines

-Rolls-Royce / Allison Motor Company

-International CFM

-Electricity Company General

-International IAE

-Pratt and Whitney Group


-Pratt and Whitney, Canada

-Rolls-Royce Limited

-Honeywell / Garrett-Turbine Motor Company



-Honeywell-Backup power units and air cycle machines

-Hamilton Standard Starters

-Hamilton Sundstrand corp .- APU, Constant speed drives and integrated drive generators

Mobile JetOil II

Approved against Mil-PRF-23699

Typical Properties

Mobil Jet Oil II

cSt @ 40 º C (102 ° F) 27.6

cSt @ 100 º C (212 º F)) 5.1

cSt @ -40 º C (40 ° F),% change after 72 h 11,000, -0.15 @ -40 º C

Pour Point, ° C (° F), ASTM D 97 -59 (-74)

Flash Point, ° C (° F), ASTM D 92 270 (518)

Fire Point, ° C (° F) 285 (545)

Autogenous Ignition Temperature, ° C (° F)) 404 (760)

TAN (mg KOH / g sample) 0.03

C kg Density @ 15 º / l, ASMT D 4052 1.0035

Evaporation loss,%

6.5 hours @ 204 ° C, 29.5 ° C 3.0 Hg

6.5 hours @ 232 ° C, 29.5''10.9 Hg

6.5 hours @ 232 º C, 5.5 "Hg (@ 40000 Ft. Altitude Equals pressure) 33.7

Foam, ml

Row I, 24 C 8

Sequence II, 93.5 C 10

Sequence III, 75 C (after 200 F test) 8

Foam Stability after 1 minute settling, ml 0

Rubber Swell

F Rubber, 72 hours @ 204 º C, 15.6%

H Rubber, 72 hours @ 70 º C, 16.4%

Sonic Shear Stability, KV @ 40 º C, change, 0.9%

Ryder Gear, Ave. lb / in,% Hercolube A 2750, 115

Product Details
No comments
Related products


QR code